• #
  • #
  • #
  • #

UZ009 Button Snap Pull Strength Tester

To determine the holding or breaking strength of the snaps, buttons or fixed accessories attached onto garments. Aim at providing the strict reference basis for garments manufacturers, to ensure the snaps, buttons and fixed accessories can be fixed on garments properly, so as to prevent from snap button fall off and swallow risks for infants.

  • Brand :

    U-TEX
  • Model :

    UZ009
  • MOQ :

    1
  • Payment :

    Telegraphic Transfer / LC
  • Lead Time :

    5-7 Days
  • Warranty :

    12 Months
  • Delivery Port :

    Any Port of China
  • Product Detail

Application

The purpose of Button Snap Pull Strength Tester is to define the responsibility of the garment manufacturer to ensure that the buttons, buttons and fasteners can be properly fixed on the garment to prevent the button from detaching from the garment, causing the baby to have a chance to swallow it; therefore, all garments on the garment Buttons, buttons and fasteners all need to pass the test of the button strength tester.


Standards

16 CFR 1500.51~53 ASTM F963 EN71-Part 1 M&S P115A


Operation

(1) Install the fixture, cooperate with the tested button, and lock the tested sample plate to the base.
(2) Put down the clamps, grasp the buttons and pull them upwards. Each group of buttons must be able to
withstand at least 17 pounds of tension (ie 7.72kg) and hold for 10 seconds without any traces of looseness
or damage. At least 20 each must be tested at the same time. The button is qualified.
(3) If one of the buttons is loose or damaged, or all the buttons need to be re-inspected after replacement.


Specifications

Model

UZ009 Button Snap Pull Strength Tester

Push pull force gauge

30kg/300N

Lifting and drop stroke

300mm


Dimension & Weight

Model

UZ009 Button Snap Pull Strength Tester

Dimensions

22 x 28 x 75cm

Weight

27kg

 

Standard Accessory

Model

UZ009 Button Snap Pull Strength Tester

UZ009-1 Imada Force gauge FB-30K

1set

UZ009-2 Calibration load weight 15LB

1pc

UZ009-3 Upper Long Nose Vise Grip

1pc

UZ009-4 Three Pronged Grip

1pc

UZ009-5 Flat Grip

1pc

UZ009-6 Universal female button grip

1pc

UZ009-7 Universal button stud

1pc


Leave Message
Hi. Please leave message now to get test solutions and offer. More information will be received within 24 hours or faster.
Related Products
UC004 Motorized Crockmeter

Crockmeter is used to determine colour fastness to wet and dry rubbing. Apart from textiles, also can be applicable for carpets, laminates, and printing inks, as well as the micro-scratch resistance of lacquers, coatings and painted surfaces. Provided with a steel specimen holder and 16mm diameter test finger.

UC013 Wascator Automatic Shrinkage Tester

The dimensional stability test of fabrics, clothing or other textiles after washing.

UC017 Infrared Laboratory Dyeing Machine

It is suitable for the dyeing of knitted fabrics, woven fabrics, yarns, cottons, fibers, zippers, shoe mesh cloths, and tests for high-temperature sample dyeing and washing fastness. It can accurately simulate actual production conditions to achieve the required process effect.

UC018A-1 Laboratory Stenter

Lab Stenter is for drying, shaping, resin processing and other tests in dyeing and finishing laboratories; it can also be used to complete the production of hand-feel samples and obtain correct color samples and tissue samples.

UC018A-2 High Temperature Laboratory Steaming Stenter

It is used for dry method, setting, resin treatment baking, pad dyeing baking and thermosetting test. In order to obtain the correct resin treatment formula, test the color change of dyeing and finishing, and verify the test result of the agent. It can also be used to complete the production of hand-feel templates to obtain the correct color and texture templates.

UC018C Laboratory Continuous HT Steamer Stenter

To simulate the dyeing and finishing process in the dyeing factory in the laboratory. Carry out resin hot melt dyeing and baking tests, and combine to verify the formulation and process conditions of dyes and auxiliaries. Test the important quality of fabric handle, degree of dye discoloration, color fastness, etc., so as to obtain the correct structure model of the finished product.

UC022 Laboratory Padder

Suitable for small batch and many varieties of fabric; Test fabric suction rate, fabric dyeing, post-treatment effect and quality.

UC001 Desktop Xenon Arc Tester

Suitable to do accelerated light fastness tests and photo stability tests.


UT001 Dual Column Universal Testing Machine

To determine the resistance to tensile rupture strength and rupture elongation property for cotton, fur, fiber, silk, wool fiber fabric, non-woven, paper, braid, etc.

UT002A Electronic Dynamometer

Used for stretching, tearing, bursting, peeling, constant elongation, constant load, elastic recovery, sewing of various textiles, nonwovens, geotextiles, zippers, rubber, shoe materials, leather, metal, building materials and other materials Analysis and testing of mechanical properties such as line slip, modulus and single yarn strength.

UT003C Socks Tension Tester

Used to test the horizontal and vertical extension performance of various socks.

UA001D Single Yarn Strength Tester

It is used to test the breaking strength and elongation of single yarn and fiber pure or blended yarn of various cotton, wool, hemp, silk, chemical fiber, core-spun yarn.

UA004B Electronic Yarn Twist Tester

To determine the twist, twist unevenness and twist shrinkage of various cotton, wool, silk, chemical fiber and other yarns and strands.

UZ009 Button Snap Pull Strength Tester

To determine the holding or breaking strength of the snaps, buttons or fixed accessories attached onto garments. Aim at providing the strict reference basis for garments manufacturers, to ensure the snaps, buttons and fixed accessories can be fixed on garments properly, so as to prevent from snap button fall off and swallow risks for infants.

UB001 Fiber Fineness Tester

To measure fiber diameter, fineness, cross-sectional area, hollowness and other tests, and can measure each fiber in the blended fiber Content.

UT008A Martinedale Abrasion and Pilling Tester

The Martindale is designed for multiple abrasion and pilling tests for various textile structures, including non-woven fabric, carpets, leather, socks, gloves, collars, cuffs, wood, high pressure laminates, painted surfaces, etc.

UT010 ICI Pilling Tester

Used to assess surface pilling degree for fabrics particularly wool knitted fabric.

UT015A 45 Degree Flammability Tester

To determine textile damaged area and length at 45 degree condition and the times of touching flame when textile is melted to specified length after heated at 45 degree condition.

UT029A Fabric Water Permeability Tester

To determine water vapor permeability (waterproofing and moisture-penetration performances) for various fabrics (including moisture permeable coated fabrics) and Non-woven fabric for garment usage including bat wool, space cotton, etc.

UZ001 Dual Column Zipper Tensile Tester

It is used for the tests of flat pull, top stop, bottom stop, open tail flat pull, socket displacement, pull tab combination, and pull head self-locking of the zipper, and the tension resistance torsion of the pull head.

UZ002 Single Column Zipper Tensile Tester

It is used for the tests of flat pull, top stop, bottom stop, open tail flat pull, socket displacement, pull tab combination, and pull head self-locking of the zipper, and the tension resistance torsion of the pull head.

UF001 Automatic Down Filling Tester

It is used for the detection of the bulkiness of down feathers and product fillings.

UG001-1000 Geotextile Comprehensive Strength Machine

Used for geosynthetic materials in transportation, water conservancy, tunnel, construction engineering and other industries, including geotextiles, composite geotextiles, geogrids, geomembranes and related products for stretching, tearing, bursting, peeling, seaming and other properties 's test.




UM003 Protective Clothing Synthetic Blood Penetration Tester

It is used to test the resistance of synthetic blood to penetration of synthetic blood under different test pressures.

UW001 Non-Woven Fabric Water Absorption Tester

It is used to measure the liquid absorption properties of non-woven fabrics, including liquid absorption time, liquid absorption amount and liquid wicking height, liquid wicking rate, etc.

UT023A Textile Digital Hydrostatic Head Tester

Used for testing water penetration resistance of all kinds of waterproof treated fabrics (such as coating cloth, tent cloth, nonwoven cloth, film material, waterproof clothing cloth and geotextile material, etc.).

Don't let your clients WAIT too long!!
leave a message
leave a message111
Hi. Please leave message now to get test solutions and offer. More information will be received within 24 hours or faster.

home

products

skype

whatsapp