Tel : +86-18850221490
Email : info@utextester.com
Zipper testers include Puller attachment Test, Closed-end Test, Open-end fastener Box Test, Reciprocation Test, Lateral Strength Test, Lateral Strength of open-end attachment Test, Slider locking Test, etc.
Comply with test standards ASTM D 2061, QB/T 2171, QB/T 2172, QB/T 2173, SATRA TM 50, CNS 1083, BS 3084, QB/T 1333
Button tester includes snap button pull strength tester, Comply with standards GB/T 22704-2008 Button Strength Test Method, BS 4162, 16 CFR 1500.51~53 ASTM F963 EN71-Part 1 M&S P115A, ASTM D5171, etc
Velcro tape tester is to test open - close fatigue, comply with standards DIN-3415, SATRA TM123, ISO 22776, GB/T 3903.20, GB/T 3903.21, GB/T 23315-2009, ASTM D5169, etc.
To determine the holding or breaking strength of the snaps, buttons or fixed accessories attached onto garments. Aim at providing the strict reference basis for garments manufacturers, to ensure the snaps, buttons and fixed accessories can be fixed on garments properly, so as to prevent from snap button fall off and swallow risks for infants.
It is used for the tests of flat pull, top stop, bottom stop, open tail flat pull, socket displacement, pull tab combination, and pull head self-locking of the zipper, and the tension resistance torsion of the pull head.
It is used for the tests of flat pull, top stop, bottom stop, open tail flat pull, socket displacement, pull tab combination, and pull head self-locking of the zipper, and the tension resistance torsion of the pull head.
IPv6 network supported
