Tel : +86-18850221490
Email : info@utextester.com
U-TEX Textile Testers can pass ISO 17025, CE Calibration. Widely used in textile factory, third party labs and university & research institutions. Comply with standards AATCC, ASTM, ISO, EN, JIS, BS, GB, AS, etc.
To determine the twist, twist unevenness and twist shrinkage of various cotton, wool, silk, chemical fiber and other yarns and strands.
To determine the holding or breaking strength of the snaps, buttons or fixed accessories attached onto garments. Aim at providing the strict reference basis for garments manufacturers, to ensure the snaps, buttons and fixed accessories can be fixed on garments properly, so as to prevent from snap button fall off and swallow risks for infants.
To measure fiber diameter, fineness, cross-sectional area, hollowness and other tests, and can measure each fiber in the blended fiber Content.
The Martindale is designed for multiple abrasion and pilling tests for various textile structures, including non-woven fabric, carpets, leather, socks, gloves, collars, cuffs, wood, high pressure laminates, painted surfaces, etc.
Used to assess surface pilling degree for fabrics particularly wool knitted fabric.
To determine textile damaged area and length at 45 degree condition and the times of touching flame when textile is melted to specified length after heated at 45 degree condition.
To determine water vapor permeability (waterproofing and moisture-penetration performances) for various fabrics (including moisture permeable coated fabrics) and Non-woven fabric for garment usage including bat wool, space cotton, etc.
It is used for the tests of flat pull, top stop, bottom stop, open tail flat pull, socket displacement, pull tab combination, and pull head self-locking of the zipper, and the tension resistance torsion of the pull head.
It is used for the tests of flat pull, top stop, bottom stop, open tail flat pull, socket displacement, pull tab combination, and pull head self-locking of the zipper, and the tension resistance torsion of the pull head.
It is used for the detection of the bulkiness of down feathers and product fillings.
Used for geosynthetic materials in transportation, water conservancy, tunnel, construction engineering and other industries, including geotextiles, composite geotextiles, geogrids, geomembranes and related products for stretching, tearing, bursting, peeling, seaming and other properties 's test.
It is used to test the resistance of synthetic blood to penetration of synthetic blood under different test pressures.